HYDRAULIC STEERINGHydrive-Logo     

 

 

HYDRIVE STORY

Hydrive equipment is manufactured to the finest tolerances possible using the latest computer controlled machines. Every single component is measured and tested at least twice before assembly. It is then tested again in the final assembly in stringent working conditions. All our equipment is designed with huge safety margins to maximise your safety. Along with this all our products are manufactured using only the very best material to ensure corrosion resistance and serviceability even in the worst possible conditions.

COMPLETE SYSTEMS
A24-4006 OBKIT5 FRONT MOUNT SYSTEM (turns Ho/Ho 4.5) - 216 FM Cylinder This cylinder is capable of handling single engine installations up to 300HP or multiple engine installations up to 600HP. It requires a small amount of tolerance (615mm) Dimension: 737.50 full RAM end stroke length. Each complete kit contains Hydrive hydraulic fluid; 2 x brass fittings, 1 x 12m length of hydraulic tubing, 1 x plastic bleed bottle, 1 x Hydrive Helm and a Hydrive Ram.
A24-4006TILT OBKIT5 UPGRADE TILT FRONT MOUNT
Front-Mount-System
A24-4007 PROKIT COMPACT FRNT/MNT SYSTEM (turns Ho/Ho 4) (Bull Horn) For small inboard vessels, jet units and outboards up to twin 150HP CXL or 235 HP single. The complete PROKIT is the ideal choice using the 212BH cylinder. Each complete kit contains Hydrive hydraulic fluid, 2 x brass fitting, 1 x 12m length of hydraulic tubing, 1 x plastic bleed bottle, 1 x Hydrive Helm and a Hydrive Bull Horn Ram (19' - 492mm) Blank
A24-4008 STD A24-4008-H HONDA A24-4008-M MERCURY OBKIT1 FRONT MOUNT SYSTEM (turns Ho/Ho 5) (Bull Horn) - 210 BH It is capable of handling single and multiple engine installations (up to 1200HP). Requires only a small amount of clearance (615mm). Each complete kit contains Hydrive hydraulic fluid; 2 x brass fittings, 1 x 12m length of hydraulic tubing, 1 x plastic bleed bottle, 1 x Hydrive Helm and a Hydrive Bull Horn Ram (26" = 660mm)
A24-4008TILT OBKIT1 UPGRADE TILT FRONT MOUNT
A24-4008B BOSUN OBKIT1 BULLHORN
Blank
A24-4009 SPORTKIT COMPACT SIDE MOUNT SYSTEM (turns Ho/Ho 3) For small inboard vessels, jet units and outboards up to twin 150HP CSL or 235 HP single. The complete Sportkit is the ideal choice using the 212T Sport cylinder. Giving direct control for most boats up to 8 metres, this cylinder is made from the finest anodised aluminum and stainless steel.   Blank
A24-4010 OBKIT3 SIDE MOUNT SYSTEM (turns Ho/Ho 5) The side mount 210TSE (unbalanced) can handle the same horsepower as the power Bull Horn cylinder (up to 225 HP CXL), but it is simpler and cheaper to install. The only restriction to fitting them is the side clearance requirements in the engine well. Side-MountSystem
A24-4011 OBKIT4 DOUBLE ENDED TRANSOM MOUNT SYSTEM 210DE (turns Ho/Ho 6) The perfect steering solution for narrow engine well installations as it offers minimum space wastage and stationary hoses during operation. The tie bars need to be custom made to fit, and provide universal movement on each end to allow independent tilting of the motors. Double-EndedTransom-Mount-System
A24-213LSC12 IBKIT4 MODEL 213 BALANCED CYLINDER For larger vessels, and those demanding increased protection from exposure to heavy conditions. Materials used include: Chrome- plated brass, bronze and stainless steel, it is also fully insulated to help prevent electrolysis and is designed for in-field use. Balanced-Cylinder
A24-4012 HYDRAULIC CABLE STEERING The new HyDrive Bosun HydraCable cleverly combines the best features of both cables and hydraulics into a perfect steering solution for single outboard engines up to 200HP or twin outboards up to 150HP (counter- rotating). Hydraulic-Cable-Steering
Hydraulic Components (Can be purchased separately)
ADMIRAL HELM UNITS
Compact low-profile helm with minimal protrusion from the console. Solid stainless steel helm shaft for optimum strength and durability. 4 precision bearings for smoothest performance. All helms are built to high performance standards.
A24-4000 101N8 HELM 1.7cu ins (28cc)/rev Meets NMMA requirements Optical 20 degree Bezel Kit alters angle of wheel to dash Helm
A24-101N8-FM 401N8 HELM                                         Front Mount Helm now std on all kits. Displaces 28cc 3/8" Mount-Helm-now-std
ADMIRAL HELM UNITS (CONT)
A24-4001 102N8 HELM 2.00cu ins (35cc)/rev Meets ABYC requirements Optical 20 degree Bezel Kit alters angle of wheel to dash Helm
CYLINDER UNITS
A24-4140 212 PRO COMPACT FRONT MOUNT CYL 135cc Front-Mount-Cyl-135cc
A24-4141 210BHN8 FRONT MOUNT CYL 3/8" 154cc Front-MountCyl-154cc
A24-4142 216FM NEW FRONT MOUNT CYLINDER 137cc Front-Mount-Cylinder-137cc
A24-4149 212TN8 COMPACT SIDE MOUNT CYL 78cc Compact-Side-Mount-Cyl-78cc
A24-4150 210TSEN8 SIDE MOUNT CYL 3/8" 154cc Side-Mount-Cyl-154cc
A24-4151 210TN8 BALANCED SIDE MOUNT CYL. 154cc Balanced-Side-Mount-Cyl-154cc
A24-4160 Double Bracket               A24- 4161 Not Balanced A24-4161B 210 Type Balanced. 210N8 BRACKET MOUNT CYLINDER FOR INBOARDS (turns Ho/Ho 5.5) This bracket-mounted 210TNE (balanced) cylinder combined in this kit with the Admiral 101 Helm provides a useful installation option for inboard engines. Bracket-Mount-Cyl-Inboards
A24-4506
A24-4501
A24-4500
A24-4601
N.B.
BYPASS VALVE FOR LIQUID TIEBAR   100M 3/8" NYLON HOSE (SOLD PER M) HOSE 15M HOSE   ULTRA 15 HYDRIVE FLUID (PER LITRE) SEALKITS AVAILABLE ON REQUEST HydraulicSteering-Kit


HYDRAULIC STEERINGHydrive-Logo         

ADMIRAL HEAVY DUTY BOAT STEERING
A24-3000 304 HELM UNIT (OLD TYPE)
A24-3005 103HD HELM UNIT
A24-3020 330C CAT BALL VALVE KIT
A24-3021 DUAL HELM KIT FOR 304 HELM
A24-3022 331C LOCK VALVE (AUTO PILOT)
Heavy-Duty-Boat-Steering
ADMIRAL HEAVY DUTY STEERING CYLINDERS
A24-3010 H150-9 SLAVE CYLINDER
A24-3012 HD175-10 SLAVE CYLINDER
Heavy-Duty-Steering-Cylinders
NOMINAL DIMENSIONS IN MID STROKE POSITION
MODEL HD-150-9 HD150-12 HD175-10 HD175-12 HD200-12 HD200-15 HD250-12 HD250-15
STROKE 230 305 254 305 305 380 305 380
A 557  635  583  685  685  835  685  835
B 139  215  165  190  215  290  215  290
C 743  898  794  900  900  975  900  975
D 52 52 52 52 52 52 52 52
E 60 60 60 60 60 60 60 60
F 102.5 102.5 102.5 102.5 102.5 102.5 102.5 102.5
G 106 106 106 106 106 106 106 106
H 218 265 240  265  265  340  265  340
I 375 450 400  450  450  525  450  525
J 53 53 53 53 53 53 53 53
K 106 106 106 106 106 106 106 106
SOME POSSIBLE STEERING TORQUE COMBINATIONS for single & dual cyl. systems
CYL/MODEL TORQUE KgM VOLUME cc's 301 HELM 304 HELM TURNS
305 HELM Ho/Ho
150-9 107 172 4.9 4 2
150-9 x 2 214 344 9.8 8 4
150-12 143 229 6.5 5.3 2.7
175-10 185 296 8.4 6.9 3.4
175-10 x 2 370 592 n/a 13.8 6.8
175-12 221 355 10.1 8.2 4.1
175-12 x 2 442 705 n/a n/a 8.2
200-12 289 463 13.2 10.8 5.4
200-12 x 2 578 926 n/a n/a 10.8
200-15 362 579 n/a 13.5 6.7
250-12 506 811 n/a n/a 9.4
250-15 633 1014 n/a n/a 11.8
250-12 x 2 1012 1622 n/a n/a 18.8
250-15 x 2 1266 2028 n/a n/a 23.6
 NB APART FROM STOCKED CYLINDER ITEMS THE OTHER LISTED ITEMS ARE AVAILABLE ON REQUEST
SEAL KITS
A24-SK216FM SEAL KIT 216 FRONT MOUNT
A24-SK411BH SEAL KIT 411 BH CYLINDER
A24-SK101 SEAL KIT 101 HELM
A24-SK201 SEAL KIT 201 AND 202 HELMS
A24-SK210 SEAL KIT 210 CYLINDER
A24-SK210BH SEAL KIT 210 BH FRONT MT CYL
A24-SK210T SEAL KIT 210T CYLINDERS
A24-SK211BH SEAL KIT COMPLETE 211BH
A24-SK212 SEAL KIT 212 CYLINDER
SEAL KITS

Hydrive-Seal-Kit